Bit

hello, whenever hyper-v vm modified or migrated, want detailed notification. e.g. virtual machine modified or migrated,        source hyper-v host,        destination hyper-v host in case of migration or vm movement,        action done on vm like, vm creation, deletion, modification, migration, movement, etc i got 1 wmi api msvm_concretejob. whenever action done on vm class creates instance job, nto give information vm being modified job , destination or source hyper-v host it. does 1 know how information? thanks , regards, geeta hello, you information scvmm, contains audit log.  might way report on it. here interesting tool, haven't used, looks interesting.  appears have email support. http://www.netwrix.com/change_reporter_system_center_virtual_machine_manager_freeware.html nathan lasnoski Windows Server  >  ...

windows 2008 r2 domain controller integrated secure dns when run bpa following: issue: the network adapter local area connection not list loopback ip address dns server, or configured first entry. impact: if loopback ip address first entry in list of dns servers, active directory might unable find replication partners. resolution: configure adapter settings add loopback ip address list of dns servers on active interfaces, not first server in list. the problem have 127.0.0.1 loopback list #3 like this: primary: 10.10.10.2 (actual static ip of server) secondary: 10.20.20.2 (another dns server on network) third: 127.0.0.1 any idea why i'm getting bpa error? i think shall follow link change dns settings on dc. i'm sure issue resolved. http://abhijitw.wordpress.com/2012/03/03/best-practices-for-dns-client-settings-on-domain-controller/ note: once change settings don't forget run ipconfig /flushdns & ipconfig /registerdns ...

all our clients cannot control windows update options.  not want use wsus. if right-click computer , go automatic updates, options greyed out. can please tell me on our sbs can go allow our users control update options? thanks! hi,   this issue can caused windows update related group policy.   please disable group policy: computer configuration\administrative templates\windows components\windows update\configure automatic updates or delete registry key: hkey_local_machine\software\policies\microsoft\windows\windowsupdate.   for more information, please refer following microsoft kb article:   how configure automatic updates using group policy or registry settings http://support.microsoft.com/kb/328010     regards,   forum support please remember mark replies answers if , unmark them if provide no help. if have feedback technet subscriber support, contact   tnmff@microsoft.com   .   please ...

hi guys, is possible have vm on hyperv numa configuration if host machine's hardware not numa? host machine smp 4 cores. hello i think can.. has been done in past sql server.. if not best practice , not production @ all. can check if helps you.. http://blogs.technet.com/b/windowsserver/archive/2012/04/05/windows-server-8-beta-hyper-v-amp-scale-up-virtual-machines-part-1.aspx regards ------------------------------------------------------- understand little computers. Windows Server  >  Hyper-V

we have authorization store in active directory our development enviroment deploy production through automated method.  that not want recreate manually.  is there copy , rename procedure or deployment procedure can used? thanks, glenn hi, can use ldifde tool export , import ad data. detailed instruction, please refer following article. using ldifde import , export directory objects active directory http://support.microsoft.com/kb/237677 after getting file, modify domain information accordingly , import production environment. thanks. this posting provided "as is" no warranties, , confers no rights. Windows Server  >  Windows Server General Forum

hi guys, i've got script need with. need put on txt or csv list of members each group discovered in particular ou tree i'm getting result lists if there 1 member of group. $groups = get-adgroup -filter * -searchbase "ou" $result = @() foreach ($group in $groups) { $members = get-adgroupmember -identity "$group" $return = new-object psobject $return | add-member noteproperty -name "groupname" -value $group.name $return | add-member noteproperty -name "member" -value $members $result += $return } $result | export-csv c:\test\securitygroups.csv -notypeinformation any appreciated thanks the memers object in cases array or collection. you need enumerate array , create array of psobjects each member. like so: $groups = get-adgroup -filter * -searchbase "ou" $result = @() foreach ($group in $groups){ $members = get-adgroupmember -identity "$group" foreach ($member in $members){...

buenos dias tengo problemas con mi servidor dns principal. explico detalle mi escenario. tengo un servidor active directory y con dns primario con mi segmento de red 192.168.55.x servidor secundario de active directory y dns secundario con mi segmento de red 192.168.50.x ambas redes configuradas para que convivan perfectamente con un router cisco 2800 series el problema en especifico es: desde mi servidor primario realizo consultas dns hacia afuera y no tengo respuesta c:\documents , settings\$$$$$$$>nslookup hotmail.com 192.168.55.### *** no se puede encontrar el nombre de servidor para la dirección 192.168.55.### : non-existent domain servidor:  unknown address:  192.168.55.### dns request timed out.     timeout 2 seconds. *** la petici¢n unknown caducado lo raro: desde mi servidor secundario todas las consultas dns funcionan perfectamente c:\documents , settings\$$$$$$>nslookup hotmail.com 192.168.50.## se...

hi folks i'm working in 2003 domain environment group policy redirecting users documents file server. understand default behaviour of redirected files synchronize using offline files feature of windows. some users have reported me machines have started synchronize other users folders under user share can increase time taken , result in failures. note not users synchronized machines have gone ary. users reporting fault synchronizing 1 or 2 other folders, seemingly selected @ random. these need not have been folders of people have logged machines before. there doesn't seem setting control behaviour , solution i've found rebuild of affected system. there group policy supposedly shuts off automated syncing of redirected folders point blank doesn't work. anyone seen before advise me? hi, on affected system, please logon user account , go offline files, check if other folders (which should not sync) listed in "view offline files". if so, check the securit...

hi guys, i've begun our ipam setup on 2012 server in our production environment , have following setup: ipamserver - ipam, nps (server 2012) dc1 - dc, dns, dhcp (server 2012) dc2 - dc, dns, dhcp (server 2012) dc3 - dc, dns, dhcp (server 2008r2) dc4 - dc, dns, dhcp (server 2008 sp2) dc5 - dc (server 2008 sp2) dc6 - dc, dns (server 2008r2) dc7 - dc (server 2008r2) dc8 - dc (server 2008r2) dc9 - dc (server 2008r2) so pretty followed "step-by-step" guide here http://technet.microsoft.com/en-us/library/hh831622.aspx , did not have issues along way.  group policies have been created using powershell commands , have set security on these apply relevant servers , group policies have applied correctly , can see results of policies such ipam server being able see event log, firewall policies etc. i have run gpupdate /force on machines (have not rebooted yet) , waited policies applied, seeing "ipam access status" blocked after setting "mana...

as know, windows 7 , win 2008 dc use aes kerberos encryption . can configure gpo applies windows 7 machines only, enforse use of aes kerberos ? and if that, winodows 7 machines able access resources on win 2003 or windows xp machines? ammarhasayen from below post xp & windows 2003 support aes. http://support.persits.com/show.asp?code=ps040625142 http://support.microsoft.com/kb/948963 you can use wmi filtering in gpo targeting specific os.   http://technet.microsoft.com/en-us/library/cc758471%28ws.10%29.aspx http://blogs.technet.com/b/grouppolicy/archive/2009/07/30/security-filtering-wmi-filtering-and-item-level-targeting-in-group-policy-preferences.aspx http://www.grouppolicy.biz/2010/02/how-to-find-and-use-wmi-values-for-group-policy-filtering/   regards awinish vishwakarma| my blog disclaimer : posting provided as-is no warranties or guarantees , confers no rights. ...

we experiencing intermittent issue appears triggered race condition during vm import.  first, background. have 2 servers set in failover cluster sharing cluster shared volume (csv), importing vms.  each of these vms references unique vhd (xyz.vhd).  for example, may have 12 or 20 vms each reference own, unique vhd.  each of these unique vhds reference same, common parent (call a.vhd).  so there 12 or 20 diff disks point same parent.  each server assumes responsibility half of vms. when triggering import of 12 or 20 vms simultaneously, observe following in our vmms error logs:   event id: 18250 level: error user: system opcode: info   import completed warnings. please check admin events in hyper-v-vmms event log more information. ----------------------- event id: 18510 level: error user: system opcode: info   import task failed fix acl file 'c:\clusterstorage\volume1\base-images\winxp_01-1.vhd' error...

hallo, this small network. have got ts windows server 2003 users log on. in server there 2 nics. nic a. has got gateway , connected local network , b. has got gateway , directly connected internet. problem sometime traffic sessie send internet , comes differed ip address terminal server not accept.   is there way traffic comes nic a. go same nic? if possible how do this?   in future want ts sessie use nic b. http traffic. possible?   greetings, bryan you need setup routing table correctly using route command.  if remember right, win2k3 not support both nic's having gateways assigned them. Windows Server  >  Remote Desktop Services (Terminal Services)

i new @ explain me how copy memberships 1 user another? lets source bbide , target adide.. i suggest ask here : ps forum http://social.technet.microsoft.com/forums/en/winserverpowershell/threads , refer similar discussion answered here: https://social.technet.microsoft.com/forums/windowsserver/en-us/9150b08c-6dee-47ec-8ca1-63887a11b09a/copy-group-memberships-from-specific-user-to-another-user-with-powershell?forum=winserverds devaraj g | technical solution architect Windows Server  >  Directory Services

i've created storage pool data, consists of 10 3tb drives and one 2tb drive, connected through 2 raid controllers, set raid 0. (they're dell controllers on t310 server, don't give me option of bypassing raid interface completely). created 2 storage spaces, each 50tb, 1 two-way mirror , 1 parity. i've copied 15tb of data on in total, using total 19.7tb capacity - 15.6 in parity , 4.05 mirrored. everything fine @ first, disks got fuller, began encounter frustrating problem, has gradually gotten worse. when copying data drives, volume disappear file explorer, , dashboard throw error "one or more drives not functioning , offline". if enter "manage storage spaces" ui, see "error" rather "okay" on space using, every physical drive still says "okay", , provides me no options troubleshooting. after error occurs, hdd lights on external drive enclosure blinking away though writing data - stops after few minutes. if attem...

i have large hyper-v 2012 r2 host server many fc raid storage unit (san) physically connected it. storage unit formatter in ntfs filesystem well. large capacity raid, 10 tb (the smaller) 35 tb (the larger), total capacity around 65 tb overall. on hyper-v host have few virtual servers (all 2012 r2 std) , 1 main business file virtual server, on hyper-v host did create few vhdx volumes physically located on raid storages , attached virtual server (guest os), according microsoft best practice hyper-v (no physical attach virtual guest os). working fine , quick no problem. did observe microsoft recommendation on vhdx, main "production" volume, did fixed size vhdx (15 tb) , archives volumes (low access), leave them variable vhdx. now getting bit confused regarding microsoft best practice ntfs filesystem free space management... because in 1 hand have de physical raid disks ntfs , have virtual vhdx ntfs too. during initial setup (on "test lab"), created test vhdxs...

i trying figure out happen if have 2 servers in hyper-v cluster, both of running windows 2008 r2 sp1 , using dynamic memory.  what happens if 1 host fails?  will hyper-v on running host reduce amount of memory it's running vm's allow new vm's (migrated failed host) start? here example: host1 (32gb ram): app1 (startup ram: 4gb, max: 15gb, current 15gb), app2 (startup ram: 4gb, max: 15gb, current 15gb) host2 (32gb ram): app3 (startup ram: 4gb, max: 15gb, current 15gb), app4 (startup ram: 4gb, max: 15gb, current 15gb) now, if host2 fails, host1 try start app3 , app4.  but won't have enough memory because app1 , app2 using 30gb of 32gb physical ram.  will reduce amount of ram used app1 , app2 can start app3 , app4?  or necessary (or idea) reduce max memory on vm's there enough free physical memory in host startup vm's failed host? i hope makes sense someone.  the possibility of using dynamic memory on 2 node cluster eliminate need have double amou...

hello all, i've been running dell poweredge 840 few months @ work, have been using fax server, among other things, robotics 3453c modem connected via serial cable. in beginning work fine,  past few months else start using com1 port , fax stop working. when go modem properties , try query modem, says "the port modem using open application. exit application may using port." i'm not sure using port, think may have apci multiprocessor. if uninstall , reinstall modem driver, fax start working again, pretty i've been doing 3 months, happening every day past few days, instead of 2-3 times month. i've tried create com port in device manager see if help, whenever resource conflicts apci multiprocessor , pci bus. appreciated. below modem log, not sure if help. --- 03-17-2009 10:15:43.333 - file: c:\windows\system32\drivers\modem.sys, version 5.2.3790   03-17-2009 10:15:43.333 - file: c:\windows\system32\modemui.dll, version 5.2.3790   03-17-2009 10:15:43.333 - file: c:\...

hi there.  have bit of strange problem newly installed 2008 server regarding remote connections it.  server setup standard remote connectivity(eg not full term server) , connect via dedicated remote server @ our main office(as via remote vpn tokens when out , about.)  server located @ different office across vpn.  have issue couple of user's cannot connect - point asks them username , password(on actual server) won't accept username/password details.  i'm rather baffled connecting through our dedicated remote server(which have tried them general admin account there own accounts) server , trying logon using administrator account!  it's if 'local pc' issue, fact remoting onto remote server , onto 2008 server find difficult believe.  or advise mucha appreciated - in advance, midly confused mike! :) hi mike, can please give me more details.   are users in domain? are connecting via mstsc client remote server? what event log of remote...

i running windows 7 , have script includes blat command.  works fine when run manually won’t send email when setup in scheduled task.  has had success similar issue?  have tried forms of ways work , frustrated hoping can shed light make work.  thank you. i'm not familiar blat, guess based on information provided if you're running scheduled task in non-user context (i.e. system account), smtp server may not accept message sent anonymously. i hope post has helped! Windows Server  >  Windows PowerShell

hi, all of sudden more 30 wsus clients not reporting anymore. error code 80072ee2. in day stop reporting, notice have applied security update wsus server. what should do? thank you. >what actual security update installed? kb951746 >why one security update installed? it suggest nessus tenable specifically reason have installed *this* security update on *wsus* server? is wsus server configured dns server? after installing *dns* security update -- did confirm, first, dns operating? if dns not working, root cause. if wsus server not have dns installed -- update not appropriate , should uninstall update. lawrence garvin, m.s., mcitp:ea, mcdba, mcsa principal/cto, onsite technology solutions, houston, texas microsoft mvp - software distribution (2005-2011) mvp profile: http://mvp.support.microsoft.com/profile/lawrence.garvin blog: http://onsitechsolutions.spaces.live.com Windows...

i'm having bit of difficulty passing variable stored procedure powershell 2.0 ms sql server 2008. problem powershell script, stored procedure, or maybe (probably) both. the purpose retrieve date entries in our staff scheduling software on per-location basis. that, write icalendar ics file each location out web server google calendar subscribes to. separate stored procedure each location, thought bit more elegant , manageable have 1 , pass location variable in invoke-cmdsql commandlet. i'd loop through array of locations , call commandlet each time. here's powershell bit:   $ds = invoke - sqlcmd - serverinstance mydbserver - database my_db - query "exec dbo.spgetresults" - variable "@assignname=$location"   i've tried without '@' in front of variable name well.   and here's have in stored procedure:   use [my_db] go /****** object: storedprocedure [dbo].[spgetresults] script date: 04/08/2011 12:24:23 ******...

client has rwa running on sbs 2011 standard,  users can log in web console with standard user accounts. when clicks on of shared folders error: unexpected error occurred.  please try again. if problem continues, contact person manages server. problem goes away temporarily reboot not solid fix.  know how troubleshoot this? regards, matt hi, here similar thread, notice last post. error in remote web access - "an unexpected error occurred. please try again. if problem continues, contact person manages server." http://social.technet.microsoft.com/forums/en-us/e13258e3-1fa7-4b8c-bf9c-c2ac7223b672/error-in-remote-web-access-an-unexpected-error-occurred-please-try-again-if-the-problem?forum=winserveressentials Windows Server  >  Network I...

we trying import entry in microsoft ad lds has 13k values multivalued attribute. found takes around 1500 values attribute , starts throwing error "administration limit exceeded". hi, in active directory(windows server 2003 forest mode) limit around 1300 values, pre-windows 2003 forest mode limit approximately 850 values. please refer follow links details. active directory maximum limits – scalability: http://technet.microsoft.com/en-us/library/active-directory-maximum-limits-scalability(v=ws.10).aspx adam: multi-valued (string) attributes: maximum number of values? : https://groups.google.com/group/microsoft.public.windows.server.active_directory/browse_thread/thread/73462d3e2da8fe75/?hl=en the way expand creating linked dn-string(or dn-binary) attribute. dn-string syntax found here: http://msdn.microsoft.com/en-us/library/windows/desktop/ms684430(v=vs.85).aspx producing list of multivalued linked attributes: http://blogs.technet.com/b/activedirectoryua...

hi guys, why null value if statements not working? function getoutputlog($input) { $targetdir = "c:\tewmp\scriptouput" $logfile = "c:\temp\scriptoutput\log.txt" if(!(test-path -path $targetdir)) { new-item -itemtype directory -path $targetdir } if($input) { $currentdat = get-date out-file $logfile -append -inputobject "### $currentdate ###" } if(!$input) { out-file $logfile -append inputobject "i did it!" } } regardless of how call function $input equal or $null unable date output. getoutputlog getoutputlog "dslsadjls" looks has using parameter name of $input. once changed function's parameter name, things started work function test($myvar) { if ($myvar) { # not empty } else { #empty } } having multiple if statements test if empty or not empty not needed, use if/else, if not empty this, otherwise empty this if find post ...

insert tab: insert header, footer, page number. can't.  says office.com offline. what? there no insertion tools? software broken? ah, problem corrupted profile. interesting, administrator profile came system. @ rate, had call computer specialist figured out problem , did of work entailed creating new profile of characteristics of old one. word works perfectly. run avg , malwarebytes, not mention pcmatic, can't tell origin of problem. think word  repair diagnostic should better job. @ rate, thank of help! Microsoft Office  >  Word IT Pro Discussions

hello all, im working on project have built , prepare 3 vm's hosting 2008r2 server on group of server appliances configured san. one of issues have has put stop proceedings rdp sessions vm's windowsxp pro laptop stripping files during file transfer. the summary follows: can access vm's through rdp or vmware client console session. in console session have no ability stranfer software installation, additionally dell poweredge hardware im working doesnt register usb flash storage devices when plugged in. leaves rdp connection transfer necessary software installation server side. i have succesfully managed transfer various small files in native format including adobex.exe (pdf reader) server side, install successfully. trying transfer zipped or unpacked variants of 2.05gb sized software installation iso of piece of software required hosted on servers not copying files like. @ first didn't notice file size of folder , underlying structure had been reduced when ...

hi we using ts gateway remoteapp, , worked fine until upgrade ie11 on windows 7, gives error stating on client side must ie6 , later. is there hotfix client or ts gateway? mny tx! clients w7 pro. claude hi, on rd web access server, please open iis manager.  in left pane navigate , select sites\default web site\rdweb.  in middle pane double-click http response headers , add following: name:  x-ua-compatible value:  ie=emulateie9 after making above change please log on rdweb page ie 11 , test icons show up. thanks. -tp Windows Server  >  Remote Desktop Services (Terminal Services)

hi,   how find  service account being used where? server?   script or tool ?   minimum permission service account? as hello, please start http://www.petri.co.il/find-user-based-service-accounts-with-powershell-and-command-line.htm  and http://blogs.technet.com/b/heyscriptingguy/archive/2012/02/15/the-scripting-wife-uses-powershell-to-find-service-accounts.aspx  to find service accounts. minimum permission domain user , permissions required specific service, must checked software vendor. don't make them local admin or domain admin, because easy. best regards meinolf weber mvp, mcp, mcts microsoft mvp - directory services my blog : http://msmvps.com/blogs/mweber/ disclaimer: posting provided no warranties or guarantees , confers no rights. Windows Server  >  ...

hi, i'm attempting use rd web access via internet receive following error message. "the remote computer not found. please contact helpdesk error." i've read through these forums , attempted suggestions applied situation, i'm having no luck. the rd web access works fine on local network, not on internet. please advise. server 2008 r2 hi, have configured rd gateway external access. please see following link:  http://technet.microsoft.com/en-us/library/cc772415.aspx best regards, Windows Server  >  Remote Desktop Services (Terminal Services)

hello, we have both sql server 2012 , sql server 2014 running on windows 2012 r2, , there cpu spike issue, tried use xperf , windows performance recorder, etl file loads symbols sql serer 2014 properly. since didn't work, found symbols from http://msdn.microsoft.com/en-us/windows/hardware/gg463028.aspx, , set symbol path installation folder, , not load symbols both sql server. then thought if xperf on particular process, pid 1187792 normal process id wanted check if command works or not. c:\performancework>xperf -start heapsession -heap -pids 1187792 -buffersize 1024 -minbuffers 128 -maxbuffers 128 -stackw alk heapalloc+heaprealloc c:\performancework>xperf -stop heapsession -d heaptrace.etl merged etl: heaptrace.etl the trace have captured "heaptrace.etl" may contain identifiable information, including not nece ssarily limited paths files accessed, paths registry accessed , process names. exact information depends on t he events log...

i taking online course server 2012 standard , need find free anti-malware solution. can please me ? thank in advance. pedro rivero dear friend, see following link.  http://www.win2012workstation.com/tag/antivirus/ u can also following tested , working fine !!!! unthreat antivirus ( http://www.unthreat.com/  ) immunet 3.0 ( http://www.immunet.com/main/index.html  ) and dont forgot mark answer if find usefull !!! Windows Server  >  Security

upgraded 64-bit xeon server (domain controller) winsvr2003r2 ee winsvr2008r2 ee, no problems upgrade process -- ad functioning should.  however, instance of sql server 2005 reporting services installed on server fails "error -- underlying connection closed:  could not establish trust relationship ssl/tls secure channel."   this internal site; access via http on port 80, no ssl.  i assume "secure channel" referred between winsvr2008r2 server , sql server box houses database, i'm not sure.  in poking around solution inspired reinstall existing ssl cert on new server, didn't help.   i'll grateful ideas. jim shilliday jim shilliday hello, please use sql forum instead one: http://social.msdn.microsoft.com/forums/en/category/sqlserver best regards meinolf weber disclaimer: posting provided "as is" no warranties or guarantees , , confers no rights. ...

i've got server running server 2012 r2, it's got few services , such, lately there have been thousand of failed logins, seem happen every 30 minutes , there 10 or @ time. checked application logs , there seem corresponding events security-ssp @ same times, event id 1003,a s few different ones @ random times. these details 4625 events: an account failed log on. subject:     security id:        system     account name:        server$     account domain:        myserver     logon id:        0x3e7 logon type:            3 account logon failed:     security id:        null sid     account name:             account domain:   ...