HP Proliant ML350 G5 with WS2012 and HyperV

-

i installed ws2012 on ml350 g5, , installed hyperv role.

the hypervisor , services start , there no event log errors.

when configure vm, sets properly. however, when start vm, message hypervisor service not started (it is! or looks is). information indicates processor dep not enabled (it is, because hyperv not install without enabled).

any other ideas? or can tell me if system not supported hyperv? used run vmware esxi. , have run hyperv (from 2008r2) on this.

server specs:

  • xeon 5130
  • 12gb ram
  • e200 raid controller 256mb cache + battery
  • 6 x 146gb 10k sas (raid5)

regards, boon tee - powerbiz solutions, australia - http://blog.powerbiz.net.au

hi,

hardware requirements hyper-v in windows server 2012:

  • hardware-assisted virtualization. available in processors include virtualization option—specifically processors intel virtualization technology (intel vt) or amd virtualization (amd-v) technology.
  • hardware-enforced data execution prevention (dep) must available , enabled. specifically, must enable intel xd bit (execute disable bit) or amd nx bit (no execute bit).

> information indicates processor dep not enabled

data execution prevention (dep) set of hardware , software technologies perform additional checks on memory protect against malicious code exploits.

on intel processors dep called execute disable (xd), feature must enabled support hyper-v feature. check in system bios, , if hp has new released firmware, update firmware.

for more information please refer following ms articles:

enable hardware settings in bios run hyper v
http://blogs.technet.com/b/iftekhar/archive/2010/08/09/enable-hardware-settings-in-bios-to-run-hyper-v.aspx
hardware requirements hyper-v 2012
http://technet.microsoft.com/en-us/library/hh831531.aspx
download drivers , software hp ml 350 g5
http://h20000.www2.hp.com/bizsupport/techsupport/softwareindex.jsp?cc=us&lang=en&prodnameid=3279711&prodseriesid=1121586&swenvoid=1068&swlang=8&taskid=135

hope helps!

technet subscriber support

if technet subscription user , have feedback on our support quality, please send feedback here.

lawrence

technet community support



Windows Server  >  Hyper-V



Comments

Post a Comment

Popular posts from this blog

CRL Revocation always failed

-
hi all, i try configure radius server nps, somehow certificate authentication client failed with reason: reason = revocation function unable check revocation because revocation server offline. then check certificate client, certutil -f -urlfetch -verify client7.cer, result follow: issuer:     cn=entca     dc=intra     dc=domain     dc=co     dc=sg subject:     cn=computer.intra.domain.co.sg cert serial number: 1c5b00de000000000041 dwflags = ca_verify_flags_allow_untrusted_root (0x1) dwflags = ca_verify_flags_ignore_offline (0x2) dwflags = ca_verify_flags_full_chain_revocation (0x8) dwflags = ca_verify_flags_console_trace (0x20000000) dwflags = ca_verify_flags_dump_chain (0x40000000) chainflags = cert_chain_revocation_check_chain (0x20000000) hcce_local_machine cert_chain_policy_base -------- cert_chain_context -------- chaincontext.dwinfostatus = ce...
Read more

Failed to query the results of bpa xpath

-
Image
i have new server installed hyper v, iis , domain services roles on it.  i checking event log , see warning multiple times, idea how rid of it?? failed query results of bpa xpath: microsoft/windows/fileservices:$reports$\*\result.xml:/resultdatabase/result. error: device attached system not functioning., last error: system cannot find path specified.. follow me on twitter <<< levalencia blog <<< hi, similar issue discussed in forum: to rid of warnings: 1. go dashboard 2. click on add roles , features 3. click next "before begin step" 4. select "role based or feature based installation" , click next 5. select given server server pool , click next 6. in server roles step make sure following checked:   file , storage services > file , iscsi services > file server, click next 7.click next through rest of steps , install server role 8. rerun bpa scan described earlier for more information please refer foll...
Read more

0x300000d errors in Microsoft Remote Desktop client

-
we use rd connect home users office. @ server side remote desktop gateway configured on 2008r2 server. experience following:   for years worked fine, starting last year users apple macbook experienced connection errors after new version of microsoft remote desktop in app store , automatic update. after couple of weeks error disappaered when new updates released. since 6 8 weeks problem again. because don’t have macbook cannot reproduce problem.   starting couple of weeks samsung s6 experiencing problems, here version 8.1.37.135 installed, error displayed is: can’t connect tot remote pc because remote desktop gateway server temporaraily unavailable. try connecting later or contact network administrator assistance. error code  0x300000d   because has worked fine years expect issues on client can configuration error on gateway server.   who pin point real cause?   however, testing other rd gateway server works ok settings identically....
Read more